
Capacitive Pulse Magnetizer
DXMAG12C/25C series capacitive pulse magnetizer is suitable for magnetization of permanent magnets, such as horn, DC motor, DC fan, stepper motor, rubber magnet, toy, etc., with low energy consumption and efficiency. High performance, fast magnetization speed, etc., can design various magnetizing fixtures for users. 
DX102 Handheld Gauss Meter
The DX102 portable digital Gauss meter can be used to measure the magnetic induction of various magnetic fields such as DC magnetic field, radiated magnetic field, residual magnetism, and earth magnetic field.
Range: 30.0mT, 300mT, 3000mT three gears；Battery: low voltage 6V (4 pcs of AA batteries)；Magnetic field minimum resolution: 0.1mT (1Gs)；Accuracy: 1.0% less than 1T, 2.0% more than 1T. 
Vibrating Sample Magnetometer
It can measure the basic magnetic properties of magnetic materials (such as magnetization curve, hysteresis loop, demagnetization curve, temperature rise and fall curve, etc.); Obtain various magnetic parameters such as saturation magnetization, residual magnetization, Curie temperature, coercivity, magnetic energy product and permeability etc.. 
DX105B Dual Channel Gaussmeter
DX105B dualchannel gaussmeter is suitable for weak magnetic field measurements. Different probes can be selected to match the corresponding test range. The product adopts DSP technology design, the measurement accuracy can reach 1.0%±0.003Gs; the range: 20Gs~20Gs (200Gs/200Gs/20000Gs optional); accuracy: 1.0%±0.003Gs; resolution: 1mGs (0.1Gs/) 1Gs/10GS); input voltage: 220V 50Hz. 
Magnetic flux coil
Both the Teslameter and the fluxmeter can measure the residual magnetic induction of the magnet, but when measuring a small magnet, measuring with a Hall probe (Teslameter) must accurately remove the distance between the probe and the sample surface, otherwise the measurement error Great. The use of Helmholtz coils with fluxmeters effectively solves this problem. 
Design and installation of large magnetic field coils

DX100 Hall Effect Measurement System
DX100 Hall effect test system can be divided into normal temperature, high temperature, low temperature, high and low temperature Hall effect test system; It is used to measure the carrier concentration, mobility, resistivity, Hall coefficient, etc. of semiconductor materials; It is an essential tool for studying the electrical properties of semiconductor materials. 
DXF2000 Precision Current Source
Programmable precision DC current source with 1uA high resolution, 0.015% high accuracy, high current +/105mA, and effective voltage 105V. 
AC solenoid/Impulse solenoid
To generate AC magnetic fields with solenoid has a great advantage over Helmholtz coils in that it has a compact size and a small inductance, making it easy to generate high frequency magnetic fields.
Continuous pulse magnetic field and AC magnetic field are similarities in the design. 
No magnetic moment solenoid
The nonmagnetic moment solenoid is composed of two sets of solenoids nested in a nested manner, and through a certain number of coil turns of each group of coils and a certain current direction, the magnetic field outside the solenoid is rapidly attenuated. The total magnetic moment of the tube coil is zero. 
Surface magnetooptic Kerr effect system
The surface magnetooptic Kerr effect (SMOKE) system offered by Dexing Magnet is a highsensitivity magnetometer. The hysteresis loop of the sample can be obtained by detecting the change of reflection intensity on the surface of the magnetic sample, and the Kerr angle and ellipsometry of the sample can be calculated by the hysteresis loop. 
DX2012HC soft magnetic material coercivity measuring device
DX2012HC soft magnetic material coercivity measuring device is mainly used for rapid measurement of soft materials including: pure iron and carbon steel, soft ferrite, magnetic powder and other regular and irregular open circuit samples, and the test method is reliable. 
DX2012M silicon steel material automatic measuring device
The DX2012M silicon steel material measuring device is suitable for measuring various hot rolled, cold rolled oriented and nonoriented silicon steel materials, as well as the measured silicon steel transformer core. It can accurately measure the magnetic induction Bm, specific loss Ps, hysteresis loop and AC magnetization curve of silicon steel materials under power frequency conditions. 
DX2012MD rare earth permanent magnet flux density experimental device
The NdFeB temperature irreversible loss measuring instrument meets the data provided by its foreign users for the assessment of material quality. The heating temperature is normal temperature ~200 °C, and the magnetic field range is 0~1T. 
DX2012RAMultipolar Magnetic Field Distribution Tester (manual version)
The DX2012RA magnetic distribution measuring device (manual model) has been carefully designed to test the table body and accurately control the motor to achieve accurate measurement of the surface magnetic field distribution. It is an indispensable tool for the correct evaluation of magnet magnetization accuracy and magnetic ring quality inspection. 
DX2012RB magnetic distribution measuring device
The DX2012RB magnetic distribution measuring device (automatic version) provides test reports such as XY coordinates, Pcoordinates, 3D magnetic field distribution and harmonic analysis with respect to the fundamental wave, providing accurate magnetic field distribution data for motor design. 
DX2012RD space magnetic field distribution measuring instrument
The DX2012RD magnetic field distribution measuring instrument can accurately test the spatial magnetic field distribution, and provide XY coordinates, P polar coordinates, 3D magnetic field distribution and harmonic analysis of relative fundamental waves.
It satisfies the quality inspection of permanent magnets, permanent magnet motor stators or rotors, DC magnetic field coils, and electromagnet. 
DX3000 Hall Effect Measurement System
The DX3000 Hall Effect Test System is a fully automated test system that combines Hall effect, magnetoresistance, and IV characteristics. The magnetic field is equipped with electromagnet or liquidfree superconducting magnet according to the user's needs. It is a powerful tool for researchers to study the electrical transport properties of samples. 
DXSB DoubleYoke DoubleTuning Adjustable Air Gap Electromagnet
The magnetic field is bothway adjustable, the yoke structure a closed magnetic circuit, so it has a good rigidity, magnetic field direction is horizontal, the supporting yoke rise 45°to the ground for operating the sample easily. Apply to Hall effect studies, magnetoresistance effect studies, magnetostriction studies, torque magnetometer, force method magnetometer, VSM, etc.. 
Gradient magnetic field coils
Gradient magnetic field design and production also have many forms, using the magnetic pole gradient pole, can generate a magnetic field magnetic field is not symmetrical, is usually used in the need of the sample unidirectional force test, such as force method magnetometer, magnetic powder sample Screening. 
DXDJ Multipole Electromagnet
Multipole electromagnet has four poles, five poles, six poles, eight poles electromagnet iron; Mainly used in multipolar magnetizing magnetization, radial gradient magnetic field, magnetic guidance of rotating magnetic field, etc .; Designed and manufactured according to the user's requirements. 
DX102A Portable Gauss Meter
DX102A is a portable AC and DC gaussmeter used for measuring the surface magnetic field of permanent magnets and the working magnetic field of DC motor and magnetic separators. DC Measurement Range: 30kG, 3kG, 300G; AC Measurement Range: 3Kg, 300G; Dimension: L173*W91*T42mm 
DX210 Two Dimensional Gauss Meter
DX210Two Dimensional Gauss Meter provides a widerange measurement from DC to up to 100 kHz AC magnetic field measurement; The maximum range is 300KG (30T); The VGA display can simultaneously or optionally display a variety of different measurement values for each channel: magnetic field density, frequency, temperature, angle, maximum, minimum, date and time. 
DX360 Three Dimensional Gauss Meter
The DX360 threechannel gauss meter is the world's most advanced Gauss meter; High resolution (0.1mG 10nT), high precision (±0.05%), high frequency (0100KHz), probe temperature range (269200°C)；The SVGA display can simultaneously or optionally display a variety of different measurement values for each channel: magnetic field density, frequency, temperature, angle, maximum, minimum, date, time.
Address: No. 993 Anling Road, Wuhua Industrial Park, Huli District, Xiamen, China
Phone: + 86 0592 5558386
Fax: + 86 0592 5237901
Email: sales@chinadexing.com
Contact Man
Full Name: Mr. Daniel Tsui
Rank: Marketing Manager
MSN: xydavid1999@hotmail.com
Skype: Danieltsui2007