ꁆ ꁇ

DX-F2031 Programmable DC Current Source

0.1mA high resolution, high current +/-5A, effective voltage 60V, high power current source with scanning function;
Configure RS-232C (serial port) / USB computer interface;
Suitable for Helmholtz coil excitation power and electromagnet power supply.

ꄴPrevious： DX-F2035 Programmable Power Current Source

ꄲNext： DX-F2030 Programmable Power Current Source

Characteristics:

Output current: -5A-+5A
High resolution: 0.1mA
High accuracy: 0.2%
High stability: <0.1%@10A
Effective voltage range: 0-60V
Max output power: 300W
Load DC resistance range:0-12Ω
Ground relations: floating output’
Computer interface: RS-232 (serial port), USB

Product description

Output current:

·Output range -5A-5A DC—suitable for Helmholtz coil and small eletromagnet
·Resolution: 0.1mA/5.0000A –offer enough resolution for precise magnetic field control
·Accuracy: ±（0.2% step up +5mA） Stability better than ±0.1%@5A
·Noise/Ripple:10mA RMS Typical Value @10A
·Max output power: 300W-which is suitable for driving Helmholtz coil, hollow solenoid and small electromagnet

Output voltage

·Range of effective output voltage 0V-60V DC
·Open circuit output voltage:80V+/-5V @5A

Current Reverser

·Microprocessor controlled relay reverse mode and 5 models to choose for delay time
·Shock of reversal current smaller than 1mA

Load adaptability

·Loading DC resistance range of full input 0-12Ω
·Output impedance :1MΩ
·Interior collocation output makes up to network

Load protection

·Controllable output end state
·Mode of linear Gradients deals with mutational current setting
·Rate of current linear Gradients 0.01A/S-2A/s
·Interior overpower protection

Scanning function

·Ⅰ，Ⅰ-Ⅲ,Ⅰ-Ⅲ-Ⅰquadrant three scanning modes
·Rate Range of linear scan: 0.01A/s-2A/s, setting range of max scanning current: 0.1mA-5A DC

Automatically control

·Standard equipment with RS-232 computer interface and easy-to-use interface
·Standard equipment with inner USD-RS-232 exchange interface
·Complete computer command set
·Function of trigger output synchronization
·Function of timed continuous trigger output in the process of scanning