Constant magnetic field permanent magnet
DX series constant magnetic field permanent magnets have the characteristics of no power supply, energy saving, long-term use without heat, small size and light weight. Due to the fixed air gap, it has good rigidity and the magnetic field is stable, which can be used as a standard magnetic field.
1. No power supply, energy saving, long-term use does not heat, small size, light weight, low cost.
2. Air gap fixed rigidity, magnetic field stability, can do standard magnetic field use.
3. Wide range of use, you can choose according to the different requirements of instruments and equipment permanent magnets. For high-precision magnetic field source requirements such as nuclear magnetic resonance instrument, permanent magnet magnetic field source is the best choice.
4. We can according to the user's specific requirements of the magnetic field design of special-shaped permanent magnet.
Technical parameters of DX series permanent magnet
Model
|
Polar diameter
(mm)
|
Air gap
(mm)
|
Magnetic field
(T)
|
DX5010-04 | 50 | 10 | 0.4 |
DX5010-06 | 50 | 10 | 0.6 |
DX5010-11 | 50 | 10 | 1.1 |
DX5020-04 | 50 | 20 | 0.4 |
DX5020-07 | 50 | 20 | 0.7 |
DX10020-06 | 100 | 20 | 0.6 |
DX10020-08 | 100 | 20 | 0.8 |
DX10020-10 | 100 | 20 | 1 |
DX10030-05 | 100 | 30 | 0.5 |
DX10030-07 | 100 | 30 | 0.7 |
DX10030-11 | 100 | 30 | 1.1 |
DX14040-05 | 140 | 40 | 0.5 |
DX15020-14 | 150 | 20 | 1.4 |
DX15070-05 | 150 | 70 | 0.5 |
DX165100-05 | 165 | 100 | 0.5 |
DX200110-05 | 200 | 110 | 0.5 |
Typical Cases
Model | Key Indicators | Reference Picture |
DX40 Series |
The DX40 series standard magnet is a permanent magnet specially designed for Hall sheet calibration. It is small in size and light in weight. It is suitable for calibration of Hall plates with 0.1%~1% accuracy. The magnetic field grade is optional from 0.1T to 1.1T. | |
DX-65-30 |
Peripheral size: 320*280*320mm3; pole surface diameter: Φ65mm; magnetic field gap: 25mm; magnetic field strength: ≥ 10000Gs; with a coil bobbin 5; permanent magnet bottom yoke with 4-Φ20 positioning hole. |
|
^^